| MODEL | LAMBRETTA LD 150 SERIES 2 1956 |
| Year | 1956 |
| Engine Type | — |
| Displacement / Capacity | — |
| Bore X Stroke | 57 x 58 mm / 2.2 x 2.3 in |
| Compression Ratio | 6.5:1 |
| Cooling System | — |
| Max Power | 4.7 kW / 6.5 hp @ 4750 rpm |
| Max Torque | — |
| Ignition | Contact breaker and points |
| Induction | — |
| Start System | — |
| TRANSMISSION SPECS | |
| Lubrication | — |
| Gear Box | 3-speed |
| Clutch | — |
| Final Drive | — |
| CHASSIS SPECS | |
| Frame | — |
| Front Suspension | — |
| Rear Suspension | — |
| Front Brakes | — |
| Rear Brakes | — |
| DIMENSION SPECS | |
| Overall Length | — |
| Overall Width | — |
| Overall Height | — |
| Seat Height | — |
| Wheelbase | — |
| Ground Clearance | — |
| Dry Weight | 88 kg / 194 lbs |
| Wet Weight | — |
| WHEEL SPECS | |
| Front Tyre | 4-8 |
| Rear Tyre | 4-8 |
| FUEL SYSTEM | |
| Fuel Capacity | — |
| Fuel Consumption | — |
| Top Speed | 78.9 km/h / 49 mph |
The LD 150 Series 2 is a revision of the Series 1 with a slightly higher stated output of 6.5 hp and a 6.5:1 compression ratio. It keeps the 148 cc air-cooled two-stroke and three-speed hand-change gearbox on small 8-inch wheels.
